Attaching solar PV panels to roofs with high-performance adhesives instead of complex racking systems can not only substantially reduce the cost and complexity of installing solar, it can keep buildings cooler and reduce air conditioning expenses in the summer as well.
That is the key finding from a new research presented recently by Dr. Nitin Shukla of the Fraunhofer Center for Sustainable Energy at the TechConnect World Innovation Conference and Expo last month.
For several years, Fraunhofer CSE has been working with the U.S. Department of Energy, through its SunShot initiative, and other stakeholders on approaches to lowering the cost of installing solar PV, including a “Plug and Play PV” approach designed to reduce the installed cost of solar to $1.50 per kilowatt by 2020, about half of today’s average price. To meet this objective, Fraunhofer CSE and its partners have worked to develop an adhesive-based mounting system that eliminates the need for drilling holes through the roof structure and for electrical grounding, which can save installers several hours of work per site.
At TechConnect, Dr. Shukla presented the findings of research addressing concerns that adhesive-mounted solar panels could cause heat buildup, leading to reduced service life of roofing shingles under the solar panels. Dr. Shukla and his team conducted a comparative field study to evaluate the thermal impact of adhesively-mounted rooftop PV on the roof structure. Two identical test hut structures with 12 ft by 8 ft footprint and south facing roof were built and co-located in CSE’s outdoor test facility in Albuquerque, New Mexico. Adhesive-applied PV modules were installed on one of the roofs, while the other roof served as a reference for comparison. An extensive arrangement of temperature sensors and heat flow transducers was installed on various locations of the PV panels, roof shingles and roof deck to understand temperature conditions and heat flows.
The research, presented as “Thermal Influence of Adhesive-mounted PV on Underlying Roof,” found that during summer months, the peak daily temperature of shingles under the adhesive-mounted PV panels was reduced by 5 to 15 degrees Celsius compared to exposed shingles on the reference hut. Average of the daily peak heat flow and cooling demand through the ceiling of the PV-installed test hut were also found to be almost 50% lower than the reference hut.
“As we’ve worked to refine the concept of adhesive-mounted solar, one concern we’ve regularly heard is that, without a rack separating them from the underlying roof to keep air flowing, they might drive unacceptable increases in roof-shingle temperature that can damage and degrade roofs,” Dr. Shukla explains. “Our research has demonstrated that not only is this not happening, adhesive-mounted solar can serve to cool roofs and decrease power demand for air conditioning by absorbing, and turning into electricity, sunlight that would otherwise raise the temperature of roof shingles.”
Fraunhofer CSE Executive Director Christian Hoepfner added: “What’s so interesting about my colleague Dr. Shukla’s research is that it refutes concerns that adhesive-mounted solar PV could cause roof-damaging heat buildup. In fact, in addition to the renewable energy that these panels create, they also improve the energy efficiency of the building by lowering roof temperatures to reduce AC demand.”
News item from CSE
The post Adhesive-based solar mounting systems actually keep buildings cooler, reduce HVAC expenses appeared first on Solar Power World.
Pilot study seeks drinking water advancements for nation’s capital
The Crazy Snake Worm Invasion You Haven’t Heard About
Corps’ employees feel ‘sense of pride’ when talking to students during
Thirsty? Here Are 9 Types of Water You Can Drink
Take off Preparations underway for this year’s Run the Runway in benefit of
ClipperCreek releases new ruggedized versions of its EV chargers